Skip to content
Illustration of a lobby with a wood slat feature wall, stone wall finish and wood-faced reception desk

3M DI-NOC ARCHITECTURAL FINISHES

Architectural Finishes & Surface Resurfacingin Maryland, D.C., Virginia & Delaware

Make lobbies, elevators, doors, millwork and building exteriors look new without tearing anything out. We install 3M DI-NOC finishes in wood, metal and stone for offices, hotels, healthcare facilities, apartment buildings and storefronts — then add the signs and lighting that finish the space.

WHAT IS DI-NOC?

Real texture. Real ratings. No demolition.

3M DI-NOC Architectural Finishes are self-adhesive architectural films embossed with texture that matches the print, so wood grain feels like wood and brushed metal looks like metal. They're made to resurface existing interior walls, doors, columns, cabinets and curved surfaces, so you can remodel a space without replacing it.

For building owners, that means a renovation-grade result with far less downtime, noise and waste. For us, it's a natural fit: we've spent decades installing 3M films on vehicles, walls and windows, and DI-NOC uses the same surface-prep discipline, in a different setting.

Wood grainBrushed & oxidized metalStone & marbleConcreteLeather & fabricSolid colorsAbstract & textured

AT A GLANCE

Designs
900+ wood, metal, stone, solid and textured patterns (3M)
Expected life
About 12 years indoors on vertical surfaces; 7–16 years for exterior films, by climate and pattern (3M)
Fire rating
Class A per ASTM E84 for most patterns. We confirm each pattern before install.
Adhesive
3M Comply™ air-release adhesive for a smooth, bubble-free finish
Surfaces
Smooth, non-porous metal, wood, laminate and interior glass, including curves and 3D shapes formed with heat
Cleaning
Resists common stains, cleaners and disinfectants (per 3M test data)
Indoor air
Low-emitting per CDPH Standard Method v1.2 (DI-NOC E-Series)
Product lines
Standard, Abrasion Resistant (AR), E-Series (non-vinyl), Tile (TIL), Whiteboard, Glass Finishes and Exterior

Specifications are from 3M's published data and vary by product line and pattern. Images are illustrations of finish styles, not photos of completed projects.

WHO WE WORK WITH

Built for buildings that can't close

Office towers, hotels, hospitals and apartment communities have the same problem: dated surfaces, and no good time to shut down for a renovation. DI-NOC solves both.

Also: retail stores, restaurants and bars, banks and financial offices, schools and universities, government buildings and houses of worship.

WHAT WE RESURFACE

Almost any smooth, sound surface

Walls & wall panels

Lobby feature walls, corridors and conference rooms over drywall, laminate, metal or existing panels.

Elevator cabs & doors

Cab interiors, car and hall doors, frames and transoms. Several cabs a day, or one at a time after hours.

Doors & frames

Suite, guest room, patient room and unit entry doors, refinished in place instead of replaced.

Columns & beams

Round and square columns, beams and bulkheads. The film conforms to curves and corners.

Reception desks & millwork

Front desks, nurse stations, bar fronts and built-ins, with abrasion-resistant options for high wear.

Cabinets & casework

Kitchens, break rooms, vanities and storage, updated without new boxes or doors.

Ceilings & soffits

Wood-look ceilings, soffits and coffers that would be expensive in real material.

Glass & partitions

3M DI-NOC Glass Finishes for patterned privacy on conference room glass and partitions.

Exterior doors & facades

Weather-resistant exterior DI-NOC for entry doors, storefront fascia, soffits, columns and metal panels.

REFINISH VS. REPLACE

Why owners refinish instead

Downtime

Replace or rebuildDays or weeks per area

Refinish with DI-NOCUsually overnight or a single shift per area

Dust, noise & fumes

Replace or rebuildDemolition, sanding, paint and adhesive odors

Refinish with DI-NOCNo demolition or sanding; dry application

Waste

Replace or rebuildOld doors, panels and millwork go to the landfill

Refinish with DI-NOCExisting surfaces stay in place

Lead time

Replace or rebuildCustom millwork and stone can take months

Refinish with DI-NOCHundreds of stocked 3M patterns

Cleaning

Replace or rebuildDepends on the material and sealer

Refinish with DI-NOCNon-porous; 3M-tested against common cleaners and disinfectants

Illustration of wood, stone, brushed metal and solid finish families

FINISHES + SIGNS + LIGHTING

One contractor for the whole space

A refinished lobby still needs a logo on the wall, lighting that shows off the finish, and code-compliant signs on every door. Most finish installers stop at the film. We're a full sign and lighting company, so the whole space comes from one team, on one schedule.

HOW IT WORKS

From site walk to final walkthrough

  1. 01

    Site walk & measure

    We survey every surface, check the substrate and note fire-rating needs for corridors, exits and elevators.

  2. 02

    Samples & approval

    Physical DI-NOC samples on site, plus a written proposal with exact 3M pattern numbers.

  3. 03

    Prep & prime

    Clean, repair and prime where the 3M installation guide calls for it — the step that makes it last.

  4. 04

    After-hours install

    Phased by floor, room or cab, nights and weekends, so your building stays open.

Architectural finishes FAQ

What is 3M DI-NOC?

DI-NOC is a line of architectural finishes made by 3M: self-adhesive films embossed with real texture that recreate wood, metal, stone, leather and solid finishes. It goes directly over existing walls, doors, elevators, columns and millwork to remodel them without replacement.

Is it the same as a vinyl wrap or wallpaper?

No. DI-NOC is an architectural material with fire ratings, texture and durability data. Printed wrap vinyl and wallpaper are flat graphics. DI-NOC is designed for permanent interior surfaces in commercial buildings.

Is DI-NOC fire rated?

Most DI-NOC patterns carry a Class A rating under ASTM E84 for interior use, as defined by NFPA 101 (Life Safety Code). Ratings vary by pattern and product line, so we confirm the rating for every pattern before it goes on corridors, exits or elevators.

How long does it last?

3M lists an expected performance life of about 12 years for interior DI-NOC on vertical surfaces, and 7 to 16 years for its exterior films, depending on climate and pattern. Real-world life depends on prep, traffic and cleaning. Prepping and priming per the 3M installation guide is what gets you there.

What if it gets damaged?

Damage can be repaired by cutting out the damaged section and replacing it with the same pattern, or by re-covering the whole panel. No refinishing the entire wall.

Can you refinish tile or make a wall writable?

Yes. 3M makes DI-NOC versions for covering existing tile and grout, and dry-erase whiteboard films that turn a wall into a writing surface for conference rooms and classrooms.

How much does it cost compared to replacement?

Refinishing is usually far less than replacing doors, panels, millwork or elevator interiors, because you skip demolition, disposal and new materials. Pricing depends on the square footage, the number of doors and edges, and access. We price it after a site walk.

Can you work in an occupied building?

Yes. Installation is dry and quiet, with no demolition, so we routinely phase work nights and weekends: one floor, room or elevator cab at a time.

Can I see samples first?

Yes. We bring physical DI-NOC samples to the site walk so you can see the texture and color in your own lighting before you approve anything.

Do you also do the signs and lighting?

Yes. That is the advantage of working with a sign company. We design, build and install lobby signs, LED accent lighting, ADA and wayfinding signs and murals in the same project.

Have a lobby, elevator or floor to refresh?

Tell us about the space — we'll schedule a site walk and bring DI-NOC samples.