Skip to content
Illustration of an elevator cab refinished in walnut wood grain with brushed metal base and handrail

ELEVATOR REFINISHING

Elevator Cab & Door Refinishingin Maryland, D.C., Virginia & Delaware

Scratched stainless, dated laminate and dented doors are the first thing tenants and guests notice. We resurface elevator cabs, doors and frames with 3M DI-NOC finishes. Our crew can do several cabs in a day, or one at a time after hours, so the bank stays in service.

Illustration of an elevator cab refinished in walnut wood grain with brushed metal base and handrail

Inside the cab

Wall panels, front returns, car doors and the ceiling surround, wrapped in one finish or a combination, such as wood panels with a metal base.

At every landing

Hall doors, frames and transoms take the most abuse from carts and luggage. Refinishing them makes every floor match the new cab.

Cleaner than paint

DI-NOC is rated by 3M to stand up to common cleaners and disinfectants, and it has no brush marks, overspray or cure time.

Fire code first

Most DI-NOC patterns carry a Class A rating under ASTM E84. We confirm the rating for the exact pattern you pick before it goes on an elevator.

Why refinish instead of replacing panels

A new cab interior from an elevator company means fabricated panels, lead times and a cab out of service for days. Refinishing with 3M DI-NOC Architectural Finishes goes over the existing panels, doors and frames. It adds a durable, textured finish that looks like real wood, brushed metal or stone, and there’s no demolition.

What we refinish

  • Cab walls and returns. Full wrap in one finish, or two-tone designs with a contrasting base or reveal.
  • Car and hall doors. Including the edges and the faces that see the most carts and luggage.
  • Frames, transoms and fixture plates. So every landing matches.
  • Lobby elevator surrounds. Walls and columns around the elevator bank, finished to match.

Built for high-traffic buildings

Elevators are the hardest-working surfaces in a building. DI-NOC is rated by 3M to resist common stains, cleaners and disinfectants, and its Comply™ adhesive is designed for a smooth, bubble-free finish on flat and curved panels. For high-wear cabs, such as freight or hotel service cars, we can recommend 3M’s abrasion-resistant (AR) series.

The rest of the lobby, too

Most elevator projects are part of a bigger lobby refresh. We also build lobby signs and dimensional letters, LED accent lighting and ADA and wayfinding signs, so one crew finishes the job. See interior and ADA signs and dimensional letters and lobby signs.

HOW IT WORKS

From survey to install — one team

  1. 01

    Site walk & measure

    We survey every surface, check the substrate and note fire-rating needs for corridors, exits and elevators.

  2. 02

    Samples & approval

    Physical 3M DI-NOC samples on site so you approve the real finish, not a screen color.

  3. 03

    Prep & prime

    Clean, repair and prime the substrate where the 3M installation guide calls for it — this is what makes it last.

  4. 04

    After-hours install

    Phased by floor, room or cab, nights and weekends, so the building stays open.

Elevator Cab & Door Refinishing FAQ

How long is an elevator out of service?

Our crew can refinish several cabs in a day when needed, or work one cab at a time after hours to keep the rest of the bank running. Hall doors and frames can be done floor by floor. We confirm the schedule after the site walk.

Can you wrap stainless steel elevator doors?

Yes. Stainless, painted steel and laminate panels are all common substrates. We clean and prime them as the 3M installation guide requires, so the finish bonds properly.

Do we need to coordinate with our elevator contractor?

Usually only for access: putting the cab on independent service and opening hall doors. We work with your property manager and elevator company to schedule it.

Can you add our logo or floor numbers?

Yes. We can add printed or cut-vinyl logos, floor IDs and wayfinding on top of the finish, made in our own shop.

Let's talk about your elevator cab & door refinishing

Signs, lighting, wraps or interior finishes — a project manager responds within 1 business day.