Skip to content
Illustration of a healthcare corridor with doors refinished in light oak wood grain

HEALTHCARE FACILITIES

Healthcare Facilitiesin Maryland, D.C., Virginia & Delaware

Give patient rooms, corridors and lobbies a renovated look without a renovation. We refinish doors, nurse stations, casework and elevators with 3M DI-NOC finishes designed to handle hospital cleaning.

Illustration of a healthcare corridor with doors refinished in light oak wood grain

Made to be cleaned

3M tests DI-NOC against common cleaners and disinfectants, including hospital-grade products, and publishes the results in its technical data sheet.

No dust or fumes

No sanding, painting or demolition, so there's far less disruption than traditional construction.

Low-emitting

3M lists low-VOC compliance (California CDPH Standard Method v1.2) for DI-NOC E-Series films.

Fire-rated

Most patterns carry a Class A rating under ASTM E84. We confirm the rating for each pattern and location before install.

Refresh care spaces without shutting them down

Healthcare facilities need modern, welcoming spaces, but patient rooms, corridors and nurse stations rarely close long enough for a renovation. 3M DI-NOC Architectural Finishes apply directly over existing doors, casework and wall surfaces with no demolition. 3M highlights a hospital that used DI-NOC to refurbish a patient care unit when its rooms couldn’t be taken out of service for a full remodel.

Where healthcare facilities use it

  • Patient rooms. Entry doors, wardrobes, casework and headwalls.
  • Nurse stations. Counter faces and cabinets refinished in durable wood or solid finishes.
  • Lobbies and waiting rooms. Feature walls, reception desks and columns.
  • Corridors and elevators. Doors, frames and elevator interiors in high-traffic areas.
  • Medical office buildings. Suite doors, millwork and common areas.

One partner for finishes and signs

We’ve built signs for healthcare clients including CalvertHealth. Pair your refinishing project with new interior, ADA and wayfinding signs, lobby signs, and exterior monument and LED signs.

HOW IT WORKS

From survey to install — one team

  1. 01

    Site walk & measure

    We survey every surface, check the substrate and note fire-rating needs for corridors, exits and elevators.

  2. 02

    Samples & approval

    Physical 3M DI-NOC samples on site so you approve the real finish, not a screen color.

  3. 03

    Prep & prime

    Clean, repair and prime the substrate where the 3M installation guide calls for it — this is what makes it last.

  4. 04

    After-hours install

    Phased by floor, room or cab, nights and weekends, so the building stays open.

Healthcare Facilities FAQ

Will DI-NOC hold up to hospital disinfectants?

3M tests DI-NOC against a list of common cleaners and disinfectants and publishes the results in its technical data sheet. We'll check your facility's cleaning products against that list before you choose a finish.

Do you also do wayfinding signs?

Yes. We design, fabricate and install interior, ADA and wayfinding signs, plus exterior monument, building and LED signs.

Let's talk about your healthcare facilities

Signs, lighting, wraps or interior finishes — a project manager responds within 1 business day.